HP iPAQ RX3000 Creating a Custom Backup, Open, Next, Next, Start, Cancel, Welcome, NevoBackup, All Programs, Backup Tasks, Hewlett-Packard, Mobile Media for

Getting to Know iPAQ Mobile Media

clicking on this icon ( Start > All Programs > PC > NevoBackup.

) in your system tray, or by selecting Hewlett-Packard> Mobile Media for

Note: Microsoft Active Sync must be installed in order for NevoBackup to operate.

NevoBackup has two basic tasks: Create a custom backup of my current Nevo configuration and Restore my Nevo configuration to an earlier backup.” Your previous two configurations are automatically saved.

Creating a Custom Backup

1.Place your HP iPAQ in its desktop cradle or connect it to the sync cable.

2.Right-click on the NevoBackup icon () in the system tray and select Open.

3.Select Next at the Welcome screen.

4.On the Backup Tasks screen, select Create a custom backup of my current Nevo configuration then select Next.

5.Choose a descriptive name for this configuration and select Next to save it.

6.You will be returned to Backup Tasks screen where you can perform another task, or select Cancel to exit NevoBackup.

User’s Guide 6–34