Synchronizing with Your Computer

To install Microsoft ActiveSync on your computer:

1.Insert the Companion CD into the CD-ROM tray or slot in your computer.

2.After the introduction displays, click Start Here. Follow the Setup Wizard screen instructions.

When prompted, connect your HP iPAQ and your personal computer using the supplied cables in the following manner:

To create an ActiveSync partnership between your HP iPAQ and your personal computer:

3.When prompted to do so, use the desktop cradle or sync cable to connect your HP iPAQ and your personal computer as follows:

❏If you have an rx3700 series, connect the USB connector to the USB port on your computer. Insert the HP iPAQ into the desktop cradle. Connect the AC adapter to the desktop cradle to charge it.

❏If you have an rx3100 or rx3400 series, connect the sync cable to the USB port on your computer and the other end to the HP iPAQ. Connect the AC adapter to the sync cable to charge it

Note: The HP iPAQ supports a serial connection. However, to synchronize via a serial connection, you must use a serial sync cable (sold separately.)

4.The Setup Wizard detects the programs on your computer, and guides you step-by-step so you can install ActiveSync on your computer and other optional programs on your device. Once you finish the Setup Wizard, you can disconnect the HP iPAQ from the computer.

User’s Guide

3–2