Using Wi-Fi

Changing TCP/IP Settings

Note: Most Internet Service Providers (ISPs) and private networks now use dynamically-assigned IP addresses. You will not need to change the Transmission Control Protocol/Internet Protocol (TCP/IP) settings unless your ISP or private network does not use dynamically-assigned IP addresses. If you are not sure if your ISP or private network use dynamically-assigned IP addresses, check with your network administrator.

To change TCP/IP Settings:

1.Contact your ISP or network administrator to determine your IP address, subnet mask, and/or default gateway (if needed).

2.Be sure Wi-Fi is on.

3.From the iPAQ Wireless screen, tap > Settings > Network Adapters tab.

4.In the My network card connects to... listbox, tap either The Internet or Work.

Note: If you are connecting to your ISP at home, tap The Internet. If you are connecting to a private network, such as a corporate network at work, tap Work.

5.In the Tap an adapter to modify settings box, tap HP iPAQWi-Fi Adapter.

6.Tap the IP Address tab.

7.Tap Use specific IP address and enter the requested information.

8.Tap OK to save your settings.

User’s Guide

8–11