Using Wi-Fi

Starting VPN Server Connections

To start a connection through a VPN server:

1.Be sure Wi-Fi is on.

2.Select the VPN network by tapping the Connections icon ( or ) located in the Navigation bar.

Your HP iPAQ will automatically begin connecting to the Virtual Private Network.

Setting Up Proxy Server Settings

If you are connected to your ISP or private network during synchronization, your HP iPAQ should download proper proxy settings from your computer. If these settings are not on your computer or need to be changed, you will need to set them up manually. To set up proxy server settings:

1.Contact your ISP or network administrator for the proxy server name, server type, port, type of Socks protocol used, and your user name and password.

2.Be sure Wi-Fi is on.

3.Tap the Connections icon ( or ) in the Navigation bar, and then Settings > Task tab.

4.Under My Work Network, tap Edit my proxy server > Proxy Settings tab.

5.Tap the This network connects to the Internet and This network uses a proxy server to connect to the Internet checkboxes.

6.In the Proxy server box, enter the proxy server name.

7.If you need to change port number or proxy server type settings, tap the Advanced button and change the desired settings.

8.Tap OK.

User’s Guide

8–14