5.A prompt appears, asking you to confirm the change. Click Yes to proceed.
Enabling/disabling local key cache
1.Open HP Encryption Manager ("Opening Encryption Manager" on page 33).
2.Log in to Encryption Manager ("Logging into Encryption Manager" on page 33).
3.Under Settings, locate Local Key Cache Enabled. Click Set/Change Local Key Cache.
4.Do one of the following: o To disable, select No.
o To enable, select Yes. If you select Yes, two new fields appear.
5.Complete the following fields:
IMPORTANT: HP recommends using the default settings, which will disable checking for the presence of the HP ESKM prior to booting. Only change these values if there is a concern that an unintended individual might remove the server from the environment. After repeated failures to locate the HP ESKM, the local key cache is deleted prior to boot if the number of access attempts is set to any value other than zero. All volumes remain locked until the HP ESKM is reached and retrieves the required keys.
