HP UX SoftBench Software manual

Using SoftBench Debugger

Handling Signals and Events

Figure 7-13 "Intercepts" Dialog Box

SoftBench Debugger automatically creates intercepts for all signals and events. Signal intercepts are all active, and other intercepts are suspended. Highlight an intercept and select "Activate" to use it.

The buttons below the list allow you to modify the intercepts' attributes. You can control four attributes for each intercept:

Status	Controls whether the intercept is currently Active.
	Select Suspend to deactivate an active intercept.
Report Type	Controls whether SoftBench Debugger reports the
	intercept in the Debugger I/O Area (Verbose) or
	handles it Silently.
Count	Specifies how many times the intercept should be
	ignored before SoftBench Debugger handles it.
Commands	Specifies the DDE command string (if any) to execute
	when the intercept occurs. See "Help: DDE
	Reference" for a description of these commands.

When you highlight an intercept, you can change any of the above attributes and select OK or Apply to save the changes.

You can also Activate or Suspend all intercepts by choosing the buttons

Chapter 7 215