HP UX SoftBench Software manual Load Executable Dialog Box, 166

Using SoftBench Debugger

Loading or Rerunning an Executable Program

	Choosing the menu option	Allows you to
	"File: Load Executable…" or "File: Rerun…" set the arguments,
		I/O redirection, and environment
		variables for your program. You can
		specify the default values of these
		settings by choosing "Options:
		Default Load/Rerun Settings…".
	"File:Load Executable…"	initialize all values to the defaults
		specified in "Options: Default
		Load/Rerun Settings…".
	"File: Rerun"	initialize the dialog box with the
		settings specified for the previous
		run. If you change some values and
		want to revert to the default values,
		select Load Defaults.
	All three of these commands display almost identical dialog boxes.
	Figure Figure 7-5 shows the "File: Load Executable…" dialog box.
Figure 7-3	"Load Executable" Dialog Box

Select Save As Defaults to save the current values as the new default values. This is equivalent to specifying the current values in "Options: Default Load/Rerun Settings…", or in the "Target: Modify Properties…" dialog box in the main SoftBench window.

Select OK to start the program with the current settings.

166 Chapter 7