HP UX SoftBench Software manual Compile Mode Settings Default Compiler Flag

Using SoftBench

Building Projects and Targets

Table 2-5	Compile Mode Settings
	Compile Mode		Default Compiler Flag
	■ Debug		Select to prepare an object file for
			debugging; "-g" is the default for all
			compilers except aCC; "-g0" is the default for
			the aCC compiler.
	■ Static		Select to prepare for static analysis; "-y" is
			the default.
	■ Optimized		Select to tell the compiler to optimize the
			executable (to maximize the execution speed
			and minimize space usage); "-O" is the
			default.
	For project build projects, you can override the default compiler flags
	sent to the compiler for a compile mode by changing the build
	configuration:
	1. To change the compile mode settings for all targets using a build
		configuration, choose "Builder: Manage Build Configurations…".
		To change the compile mode settings for a single target, select the
		target, then choose "Target: Modify Properties…". In the "Modify
		Target Properties" dialog box, select Customize Build Configuration… .
	2. Expand the "Specify Include and Compile Options" section of the
		dialog box.
	3.	Select the compiler in the "Set Information for Compiler"
		drop-down list. This setting controls what compiler is affected when
		you enter information such as additional compiler flags, defines,
		undefines, and compile modes.
	4.	Select Set Compile Modes… to display the "Set Compile Modes" dialog
		box.
	5.	In the "Set Compile Modes" dialog box, enter the compiler flags. For
		example, to override the "-g0" compile mode setting for debugging
		aC++ code, enter another value, such as "-g" in the "DEBUG Compiler
		Flags" input box.

6. Save your changes and close the dialog boxes.

Chapter 2 71