HP UX SoftBench Software manual

Using SoftBench Static Analyzer

If Something Goes Wrong

Table 9-2

Condition or Message	Explanation
Source file filename not	The source file you requested cannot
found.	be found. Choose "File: Customize
	File Set…" to add the project (Parent
	or Subproject) containing the source
	file which couldn't be found.
	Alternatively, add the file to the
	project by choosing "Project: Add
	File(s) to Project…" and rebuild
	the project. This may also be an NFS
	access problem. Your system
	administrator may need to add access
	to the remote system that contains the
	file.
Unable to open	SoftBench Static Analyzer cannot
Static.sadb.	open the Static database. It may be an
	incompatible version from a previous
	release of SoftBench. Delete
	Static.sadb, rebuild the code and try
	again.
Update of Static	Either your Static Analysis Database
Analysis Database	is from an earlier SoftBench release,
failed: Scanner exited	in which case you must remove the
(result==1).	database and regenerate the analysis
	database files by rebuilding your
	project (In standalone mode, choose
	"File: Analyze File Set".); or, you
	requested "File: Analyze File
	Set" when running from SoftBench
	before creating your Static database
	through a build process. You must
	first create the database by building
	your project.

Chapter 9 279