HP UX SoftBench Software manual

Using SoftBench Debugger

If Something Goes Wrong

If Something Goes Wrong

Table 7-2

Condition	Explanation
A request to the	DDE could not process a request from
debugger failed. The	SoftBench Debugger. If the solution is
request message was:	not obvious, see "Help: DDE
	Reference" to determine what went
	wrong.
The following	Operations that had been queued up
operations were	needed to be flushed for some reason.
flushed:	The error message shows which
	operations were discarded.
The asterisk ("*") is	Some SoftBench tools allow a "*" as the
invalid as a filename.	context file, but SoftBench Debugger
You MUST provide a	does not. You must provide a valid
filename to softdebug	filename.
in order to run it.
No processes were	A "File: Debug Running Process …"
found.	operation failed because no process was
	found with the name given.
No such user operation	A user-defined button was created with
op defined.	an invalid operation. Find and repair
	the faulty button definition using
	"Options: User Configurable
	Buttons…".
The button label from	The button definition at line linenum of
filename at line	file filename has no label. Add a label
linenum is empty.	in the "Button Label" field.
The button kind (or	These messages appear if an invalid
location) "string" is	button kind (MSG, RAW, OP) or location
invalid from filename	(Undefined, Frontpanel, Source,
at line linenum.	Assembly) was found in the button
	definition file filename.

Chapter 7 231