Completing the setup wizard steps

1 Press the Media Center Start button on the remote control or, with your trackball, click Start on the taskbar, and then click Media Center.

2Select Settings. You may need to use the arrow buttons on the remote control to scroll down to see all the menu items.

3Select General, Media Center Setup, and then select Run Media Center Setup Again. Follow the onscreen instructions to complete the wizard.

Following are some of the items included in the setup wizard:

Check for your Internet connection. An Internet connection allows Media Center to download and update your Television Program Guide and display information about your music CDs, DVDs, and other media.

n

You must subscribe with an Internet service provider (ISP) to have an Internet connection.

Configure your TV tuner, TV signal source, and Television Program Guide. You need to provide information about your TV signal source and your TV signal equipment (set-top box, cable, and so on). This step makes sure your HP Digital Entertainment Center receives the correct TV signal and Television Program Guide information. If you have a cable box or satellite receiver, the setup wizard programs your Media Center remote control to work with them.

n

You must select analog or digital TV signals in the setup wizard for your TV tuner to work properly (select models only).

Optimize how Media Center looks on your display. You can change display settings such as brightness, contrast, color, and centering.

Display Calibration. You can test and adjust the display settings of your monitor, TV, or other display. You can use the Media Center video to help you change onscreen centering, sizing, aspect ratio (shape), brightness, contrast, color, and sharpness of the display with your TV remote control or your monitor controls.

Set up your speakers. Select how many speakers you have and test them. Speakers are sold separately for some models.

8HP Digital Entertainment Center Software Guide