to re-enter any configuration information supplied by your Service Provider. You must enter the security code to complete the reset.

Current Settings: provides the current communications parameters.

Software Version

Interface Mode

Public Network IP Address

Private Satellite Modem IP Address

Modem International Mobile Equipment Identity (IMEI)

Satellite Modem Media Access Control (MAC) Addresses.

STATISTICS SCREEN

This screen provides you with an estimate of your data usage. Data usage figures are obtained by counting the bytes in the IP packets received by and sent from the ThurayaIP terminal. You can view both “since power on” (per session) and “Cumulative” (lifetime) data usage counts. To reset the data counters of a session, simply select the reset button for either transmit or receive and click the Apply button.

Statistics Screen

Note: The data usage figures provided on the screen are estimates only. This feature is not tied into the actual billing system. Hughes assumes no liability if differences are found between data usage figures and your actual bill.

16

ThurayaIP Satellite Modem User Guide

Page 24
Image 24
Hughes ThurayaIP warranty Statistics Screen