Inserting the Pivot Arm Assembly | Prying the Assembly Away |
Into the Mounting Bracket | from the Mounting Bracket |
|
|
Mounting the Assembly
to the Transom
4.Align the mounting bracket transdu cer assembly with the drilled holes in the transom. With a 5/16" socket driver, mount the assembly to the transom using the two #10 - 1" long screws provided (see the illustration Mounting the Assembly to the Transom).
NOTE: Make sure that the mounting screws are snug, but do not fully tighten the mounting screws at this time to allow the transducer assembly to slide for adjustment purposes.
5.Snap the pivot arm down into place.
Transom Mount Transducer Installation | 16 |
