
In addition to this manual, the option kit includes:
v
vTwo audio cables
vFour mounting screws
vone IDE cable
vTwo bezels3 for use with certain computers
vAdaptec Easy CD Creator and DirectCD software disc
vLaser Safety Guide for
vElectrical safety booklet
Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of purchase. It might be required to receive warranty service. See Appendix D for warranty information.
Software description
The Adaptec Easy CD Creator and DirectCD disc contains programs that work with Windows 95, Windows 98, Windows Me, Windows 2000, and Windows NT Workstation 4.0. You can use the programs with your
Before you begin
Read the following information before you start your installation. You must complete the following steps to install the drive:
1.Determine which IDE port to use and the corresponding configuration setting.
2.Place or change the configuration jumper on the drive (and possibly make changes to the configuration jumpers of other devices).
3.Install the drive in a drive bay.
4.Configure the system.
5.Install a device driver.
If you do not understand these procedures or are unsure about your ability to perform all the procedures described a qualified computer technician to install the
3. If you purchased the black option kit, you will receive one black bezel.