Table 2. Netcool Installer command line parameters (2 of 2)
Parameter | Description |
|
|
Defines the level of detail in the error messages written to the Netcool | |
| Installer log. This parameter is optional, and omitting it defaults the log |
| file level to warning messages only. |
| The ERRORLEVEL variable in the |
| of three values: |
| debug - Detailed logging for debug purposes |
| info - Logs warning and informational messages |
| warning - Logs warning messages only |
|
|
3.Wait for the installation to complete. A confirmation message appears at the end.
On completion, the installation adds files to your system, as described in "Netcool/Precision TN directory structure" on page 28. You can view the installation log file, as described in "Viewing the installation log" on page 21.
Before attempting to run Netcool/Precision for Transmission Networks, you must set up the Oracle database. See "Setting up an Oracle database" on page 22.
Viewing the installation log
The Netcool Installer generates an installation log file of actions performed during the installation. You can use this file to verify that you installed Netcool/Precision for Transmission Networks successfully or to troubleshoot your installation. The level of detail in the log file is set by using the
The installation log is stored in the following location:
$NCHOME/log/install/ncisetup.log
You can view the installation log at any time using the Netcool Installer Maintenance Wizard in GUI mode or in console mode.
To view the installation log using the Netcool Installer Maintenance Wizard in GUI mode:
1.From a command prompt, enter the following command: $NCHOME/install/ncisetup
The Welcome page of the Netcool Installer Maintenance Wizard appears.
2.Select the Installer Log option and click Next to continue. The Installer Log page appears with the list of actions performed by the Netcool Installer.
3.After reviewing the log, click Cancel to exit the Netcool Installer Maintenance Wizard.
Chapter 2. Installing Netcool/Precision TN | 21 |
