CE Utility Program Diskette
Note: You can download the CE Utility Program Diske from the IBM website.
Setting | the | LCD | Panel |
| ID |
|
|
| |
There is an EEPROM in | the inverter which stores i | ||||||||
ported | LCD type | ID | code. | If | you replace | a LC | |||
a | different | brand | or | use | a new inverter, | the | |||
in | the | inverter | EEPROM | should | be | updated. |
| ||
Follow the steps below to set the LCD Panel ID:
1. Boot from the Utility Program Diskette.
2. | SelectLCD | Panel | ID | Utility |
| from | PC | DOS 7.0 |
|
|
| Startup | Menu. |
|
|
|
|
|
|
| |
3. | Follow the instructions on the screen to read | |||||||||
| current | or | to | set | a | new | LCD | Panel | ID | code. |
| Note: When | you | set | a | new | LCD | Panel | ID | and th | |
| new LCD is not yet enabled (to function) | |||||||||
| connect an external CRT to see the progr | |||||||||
| execution | process. |
|
|
|
| ||||
Attention: Make sure the new ID code you cho corresponds to the LCD brand and type. If y wrong ID into the inverter, just reboot and the program and input the correct ID code.
4.Restart the computer — the new LCD should w normally.
Note: If the LCD cannot display after changing th code, make sure you write the correct ID try reconnecting the LCD FPC cable connectors.
Setting the Thermal Sensor
The system is equipped with sensors to protect system overheating. By setting the system and pr thermal thresholds, the system can turn on the co or shut down automatically when the temperature r the defined threshold parameters.
System experiencing frequent auto sensor shutdown
need to | reset | the | thermal | sensor | threshold | and | ||
the | Fan | test | to | ensure the | normal | operation | of t | |
Fan | (refer to | “Fan | Checkout” | on page 28). |
| |||
Follow the steps below to set the thermal thresho
1. Boot | from the Utility | Program | Diskette. |
2. SelectThermal Sensor Utility | from PC | DOS 7.0 | |
Startup | menu, then pressF4 . |
|
|
46 ThinkPad 390X / i 1700 HMM
