Intel MPCBL0001 manual Backing Plate, Component Height

Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Contents

6.1.2Backing Plate

The MPCBL0001 SBC has a rugged metal backing plate that forms a single-piece face plate. This backing plate is made of 1.2 mm (0.048") steel which has been zinc post-plated to resist corrosion and rust. The solid backing plate provides PCB stiffening, enhanced EMI protection from adjacent boards, and protection during flame tests. The backing plate improves serviceability by making the SBC more durable.

Four holes are provided in the bottom of the backing plate for mounting an optional hard drive in the provided hard drive carrier (with the included M3 screws). Four additional holes are provided for securing an optional PMC through the front or rear standard mounting positions.

Caution: Removing the backing plate can damage the components on the board and may void the warranty. No user-serviceable parts are available under the PCB. Do not remove the face plate/backing plate.

6.1.3Component Height

Figure 22 on page 103 and Figure 23 on page 104 detail maximum component heights on both the primary and secondary sides of the MPCBL0001 SBC.

102	Technical Product Specification
	Order #273817