Intel MPCBL0001 manual Get HW Fibre Channel Port Selection, Set Control State

Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Contents

Table 15.	Get Fibre Channel Port Selection
		7	6	5	4	3	2	1	0
	NetFn/LUN		NetFn = 3Ah (OEM Request)					RsLUN
	Command				Cmd = 03h
	Byte 1	Intel IANA number (LSB) = 57h
	Byte 2	Intel IANA number = 01h
	Byte 3	Intel IANA number (MSB) = 00h
	Byte 1				Completion code
	Byte 2	Intel IANA number (LSB) = 57h
	Byte 3	Intel IANA number = 01h
	Byte 4	Intel IANA number (MSB) = 00h
	Byte 5	Fibre Channel 1 setting, 0=disabled, 1= Front panel, 2= Backplane, 3= reserved.
	Byte 6	Fibre Channel 2setting, 0=disabled, 1= Front panel, 2= Backplane, 3= reserved.

3.7.4Get HW Fibre Channel Port Selection

This command returns the current Fibre Channel port routing selection as set in the hardware. The command is available over KCS and IPMB interface SetFiberChannelPortSelection.

Table 16.	Get HW Fibre Channel Port Selection
		7	6	5	4	3	2	1		0
	NetFn/LUN		NetFn = 3Ah (OEM Request)						RsLUN
	Command				Cmd = 04h
	Byte 1	Intel IANA number (LSB) = 57h
	Byte 2	Intel IANA number = 01h
	Byte 3	Intel IANA number (MSB) = 00h
	Byte 1				Completion code
	Byte 2	Intel IANA number (LSB) = 57h
	Byte 3	Intel IANA number = 01h
	Byte 4	Intel IANA number (MSB) = 00h
	Byte 5	Fibre Channel 1 Settings, 1 = Front Panel, 2 = Backplane
	Byte 6	Fibre Channel 2 Settings, 1 = Front Panel, 2 = Backplane

3.7.5Set Control State

This command sets the state of a control pin and overrides the control pin’s auto state. Refer to Table 20 on page 52 for control number information.

50	Technical Product Specification
	Order #273817