Intel MPCBL0001 manual Reset Bios Flash Type, Set Fibre Channel Port Selection

Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Contents

3.7.1Reset BIOS Flash Type

This command resets the processor and changes the BIOS bank select signal so that CPU boots off redundant BIOS bank.

Table 13.

Reset BIOS Flash Type

7

6

5

4

3

2

1

0

NetFn/LUN

NetFn = 3Ah (OEM Request)

RsLUN

Command

Cmd = 01h

Byte 1

BIOS checksum success/failure indication

00h

– Checksum success

01h

– Checksum failure

Byte 1

Completion code

3.7.2Set Fibre Channel Port Selection

This command sets the Fibre Channel port routing as specified in the request data bytes. The command is available over KCS and IPMB interface.

Table 14.	Set Fibre Channel Port Selection
		7	6	5	4	3	2	1		0
	NetFn/LUN		NetFn = 3Ah (OEM Request)						RsLUN
	Command				Cmd = 02h
	Byte 1	Intel IANA number (LSB) = 57h
	Byte 2	Intel IANA number = 01h
	Byte 3	Intel IANA number (MSB) = 00h
	Byte 4	Fibre Channel 1 setting, 0=disabled, 1=front panel, 2=Backplane, 3= Reserved, FF=
		Don’t change settings,
	Byte 5	Fibre Channel 2 setting, 0=disabled, 1=front panel, 2=Backplane, 3= Reserved, FF=
		Don’t change settings,
	Byte 1				Completion code
	Byte 2	Intel IANA number (LSB) = 57h
	Byte 3	Intel IANA number = 01h
	Byte 4	Intel IANA number (MSB) = 00h

3.7.3Get Fibre Channel Port Selection

This command returns the current Fibre Channel port ‘routing’ selection. The command is avail- able over the KCS and IPMB interfaces.

Technical Product Specification	49
Order #273817