Intel MPCBL0001 manual Flashdos Utility Command Line Options, Command Line Parameter Description

Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Contents

Table 97.	Flashdos Utility Command Line Options
	Command Line Parameter	Description
	/b [option] bios_image	Program a BIOS image to primary firmware hub (FWH0)
	where possible [option] values are:
	• /z - do not clear the CMOS
	• /zc - update the CMOS from image
	/i [bios_image]	Display BIOS system information
	/r [options] bin_image	Read the flash image and store to a file
	where possible [option] values are:
	• /aAddress - physical address in hex
	• pPage - page number in decimal
	• /sSize - image size in decimal
	/m	Mirror image where all the operational codes and CMOS settings
		are copied from FWH0 to FHW1 (redundant BIOS flash bank)
	/b cmos_image	Backup current CMOS settings to a file
	/r cmos_image	Restore CMOS settings from a file
	/q	Force non-interactive mode (assumes “yes” for all prompts)

146	Technical Product Specification
	Order #273817