Intel MPCBL0001 Temperature and Voltage Sensors, Offset Event Remarks Type Type Code Data 1, Bit

Intel NetStructure® MPCBL0001 High Performance Single Board Computer

Contents

Table 3.	SEL Events Supported by the MPCBL0001 SBC (Sheet 4 of 4)
Sensor	Sensor	Sensor-Specific
		Offset (Event		Event	Remarks
Type	Type Code
		Data 1, Bit 0-3)
FRU Hot	F0h	00h	M0	– FRU not installed	Refer to PICMG 3.0 Specifications (Table 3-14)
Swap
		01h	M1	– FRU inactive
		02h	M2	– FRU activation
			request
		03h	M3	- FRU activation in
			progress
		04h	M4	- FRU active
		05h	M5	- FRU deactivation
			request
		06h	M6 - FRU deactivation in
			progress
		07h	M7	- Communication lost
IPMB Link	F1h	00h	IPMB A & B disabled		Refer to PICMG 3.0 Specifications (Table 3-46)
Sensor
		01h	IPBM A enabled
			IPMB B disabled
		02h	IPMB A disabled
			IPMB B disabled
		03h	IPMB A & B enabled
NOTE:

1.These sensor offsets do not generate events, but they are valid offsets when reading the sensor values.

2.Watchdog sensor refers to WDT#1 per Section 3.13.1.

3.2.1Temperature and Voltage Sensors

Temperature and voltage readings are monitored by ADM1026. They are critical sensors that ensure the MPCBL0001 is operating at its predefined threshold limits. The sensors are categorized as follows:

•Lower Non-Critical

•Lower Critical

•Upper Non-Critical

•Upper Critical

If the lower critical or upper critical threshold is exceeded, it raises a major alarm. If the lower non- critical or upper non-critical threshold is exceeded, it raises a minor alarm.

Only critical thresholds which are exceeded turn the Health LED solid red. However, for any events above, IPMC forwards the events to the shelf manager to log it into shelf manager’s SEL.

36	Technical Product Specification
	Order #273817