OperationChapter —2
12 PK80Series 80-Column User’sManual
Check List
Make sure the following tasks are done:
SPrinter is unpacked.
SPackagingmaterial is removed from around the printer. Save the box
and materialsfor future use, such as servicing, relocations,etc.
STwist tie is removed from the print head.
SPower cable is hooked up to the vehicle battery or power source .
SPrinter is mounted in the vehicle.
The following tasksmust be done. Specific instructions for these tasks are
described on thepages given:
1Install the ribbon cartridge (page 13).
2Load the paper into the paper tray (page 15).
3Feed the paper intothe printer (starting on page 19).
Note: Complete these tasks before starting any printer operations.
Open the Printer
To open the PK80 Series Printer,place your hands on both corners, fin-
gers under the lips, and lift upwards. To close, simply press down on the
same areas.