OVEN COOKING
Cook & Hold
When using the Cook & Hold option, the oven begins to heat immediately after the control has been set. Then, the oven cooks for a specified length of time. When that time has elapsed, the oven will keep the food warm for up to an hour then automatically turn off.
To set Cook & Hold:
1.Press the Cook & Hold pad.
•HOLD will flash to indicate that you are in Cook & Hold programming.
To cancel Cook & Hold at any time:
Press the CANCEL pad. Remove food from oven.
Delay Cook & Hold
CAUTION
Do not use delayed baking for highly perishable foods such as dairy products, pork, poultry, or seafood.
•00:00 will flash in the display.
2.Select the amount of time you want to cook by using the number pads.
•HOLD continues to flash.
•The time will light in the display.
•Time can be set from ten minutes (00:10) to 11 hours, 59 minutes (11:59).
3.While HOLD is still flashing, press Bake,
Convect Bake or Convect Roast (select models) and select the oven temperature. Press the Autoset 0 pad for 350° F or the appropriate number pads.
•The desired function word will flash.
•The oven temperature can be set from 170° F to 550° F.
4.Press the desired function pad again OR wait four seconds.
•The desired function word will remain lit.
•The cooking time will show in the display.
•The actual oven temperature will be displayed during preheat.
•The set temperature will display when the oven is preheated.
When the cooking time has elapsed:
•Four beeps will sound.
•HOLD and WARM will light.
•170° will display.
•Time of day will display.
After one hour in HOLD WARM:
•The oven turns off automatically.
•HOLD and WARM go off.
•Remove food from oven.
When using Delay, the oven begins to cook later in the day. Set the amount of time that you want to delay before the oven turns on and how long you want to cook. The oven begins to heat at the selected time and cooks for the specified length of time.
Delay time can be set from 10 minutes (00:10) to 11 hours, 59 minutes (11:59).
To set a Delayed Cook & Hold cycle:
1.Press the 1 Delay pad.
•DELAY flashes in the display.
•00:00 flashes in the display.
2.Using the appropriate number pads, enter the amount of time you want to delay the start of the Cook & Hold cycle.
3.Press the Cook & Hold pad.
• HOLD and DELAY flash in the display.
•00:00 flashes in the display.
4.Enter the amount of time you want to cook using the number pads.
5.Press Bake, Convect Bake or Convect Roast pad (select models).
6.Set the oven temperature desired by pressing the Autoset 0 pad or the appropriate number pads.
•350° will light when Autoset 0 pad is pressed.
• After four seconds, the entered delay time will appear in the display.
•HOLD turns off.
•BAKE and DELAY remain lit to remind you that
a delayed Cook & Hold cycle has been programmed.
Notes:
•Do not use Delayed Cook & Hold for items that require a preheated oven, such as cakes, cookies, and breads.
•Do not use Delayed Cook & Hold if oven is already hot.
13
14 | 9/28/04, 11:40 AM |
