JVC GC-S1 manual Set the values for the date, Set the values for the time

4

5

6

Set the values for the date.

1. Rotate the MENU Jog Dial to select the item in the “DATE” section you wish to set and push it.

•The item color changes to indicate that setting is possible.

2. Rotate the MENU Jog Dial until the correct setting appears and push it.

•Repeat this procedure until you are satisfied with the date settings.

•If you wish to set only the date without changing the time, go to step 6.

Set the values for the time.

1. Rotate the MENU Jog Dial to select the item

in the “TIME” section you wish to set and push it.

•The item color changes to indicate that setting is possible.

2. Rotate the MENU Jog Dial until the correct setting appears and push it.

•When the MENU Jog Dial is pushed after the minutes are set, “EXIT” is selected and clock operation starts from 0 seconds.

•Repeat this procedure until you are satisfied with the time settings.

Rotate the MENU Jog Dial to select “EXIT” and push it 3 times.

•The shooting screen reappears and the clock starts functioning.

EN13

NOTES:

●The date/time setting is backed up by a built-in rechargeable clock battery. Connect the camera to an AC outlet using the AC power adapter for over 24 hours to charge the clock battery.

●The clock will continue to advance except while the minutes are being set. When the minutes are set and the MENU Jog Dial is pushed, the seconds are reset to “0” and clock operation starts.

●Although the date/time which you have set is stored in the camera’s built-in memory, the date/ time display will not be combined with the pictures you shoot.