JVC GC-S1 manual Small colored or black spots appear on the LCD monitor

EN63

SYMPTOM

Others

The image on the LCD monitor appears distorted.

The date/time is not displayed properly.

A Compact Flash card cannot be inserted.

None of the buttons or controls function on the camera.

Small colored or black spots appear on the LCD monitor.

Preset frame images do not appear.

CORRECTIVE ACTION PAGE

●Is the surface or the edge of the LCD monitor

being pressed? If so, release your hand and—

leave it for a while.
● The remaining power of the built-in clock
battery is close to nil. Connect the camera to the	11
AC power adapter and plug it in for over 24
hours.
● Is the Compact Flash card being held in the	46
correct direction?

●Switch the camera off, remove the power supply

(battery or AC power adapter) and press the	11
Reset Switch on the bottom of the camera with a
pin or similar object. All settings are returned to	58
their factory presets.

●The LCD monitor is manufactured using high- precision technology, however, a few pixels on

it may be always off (black) or on (lit). This is		—
not due to any defect of the camera. (Function-
ing dots: more than 99.99%)
● If the built-in memory is initialized after the
message “PLEASE INITIALIZE” appears, the	47
preset frames are erased. Consult your nearest
JVC dealer.