EN21

Self-Timer Shooting

When the Self-Timer is activated, the camera shutter is automatically released 15 seconds later. Once the camera is set, the camera operator can become part of the scene. This function can also be used to prevent blurring caused by subtle hand movements when the Shutter Release Button is pressed.

Self-Timer Lamp

Shutter Release Button

 

 

 

 

 

Blinks.

Lock Button

OFF

A Y

L

P

Power Dial

1 Turn the Power Dial, while pressing its Lock Button, to “”.

•“” appears.

•If the low light “” icon appears on the LCD monitor, use the flash (pg. 22).

2 Press the Shutter Release Button.

•The Self-Timer Lamp and the on-screen” icon start blinking, then the shutter is released 15 seconds later.

NOTES:

The Self-Timer Lamp starts blinking faster when there are 5 seconds or less remaining before the shutter is released.

If you wish to cancel the Self-Timer half-way, turn the Power Dial to any position except “ ”.

Focusing is performed when the Shutter Release Button is pressed.

Page 21
Image 21
JVC GC-S1 manual Self-Timer Shooting, Self-Timer Lamp, Blinks Lock Button