To stop playback
Press 7.
The unit memorizes the point where you stop playback and the RESUME indicator lights up on the display (except when an audio CD is loaded).
While the RESUME indicator is lit on the display, you can start playback from the memorized point by pressing
To remove the loaded disc
Press 0 on the front panel or OPEN/CLOSE on the remote control.
The disc tray opens.
After removing the disc, press the button again to close the disc tray.
•If you press STANDBY/ON on the front panel or
AUDIO on the remote control while the disc tray is open, the disc tray closes automatically, then the unit is turned off.
7Other operation buttons for the DVD playerOn the front panel
From the remote control
To stop playback temporarily
Press 8.
• Pressing 3 starts playback again.
To move back the playback position by 10 seconds (for DVD VIDEO only)
Press 3 during DVD VIDEO playback.
The unit moves the playback position about 10 seconds before the current position, then resumes playback.
To advance or reverse playback rapidly
•Press ¡ or 1 during playback (remote control ONLY). Each time you press ¡ (or 1), the unit advances (or reverses) playback, rapidly changing the playback speed as follows:
For DVD VIDEO:
x2 ] x5 ] x10 ] x20 ] x60
For DVD AUDIO/VCD/SVCD/CD: x2 ] x5 ] x10 ] x20
Pressing 3 resumes the normal playback.
•Press and hold ¢ or 4.
While you are pressing and holding ¢ (or 4), the unit advances (or reverses) playback 5 times as fast as the normal speed. When you press and hold ¢ (or 4) further, the playback speed changes up to 20 times as fast as the normal speed.
Releasing the button resumes the normal playback.
To locate the beginning of the chapter or track
Press ¢ or 4.
Press ¢ (or 4) to locate the beginning of the next (current or previous) chapter or track.
To locate the chapter or track using the number buttons
Press the number buttons (1 – 10, +10) to select the number of the desired chapter or track.
Ex.: To select 3, press 3.
To select 11, press +10, then 1.
To select 20, press +10, then 10.
About Resume play
This unit can memorize the point when you operate the following procedures:
•Pressing 7 during
•Changing the
•Turning off the unit (including Sleep Timer)— Pressing 3 starts Resume play
Once you start Resume play, the RESUME indicator goes off (the unit clears the memorized point).
The unit also clears the memorized point when you operate the following procedures:
•Pressing 7 (while the RESUME indicator is lit on the display)
•Selecting a track by pressing ¢ or 4 for video CD and super VCD when playback stops
•Selecting program or random playback
•Pressing TOP MENU
•Ejecting the loaded disc
•Turning on the unit by pressing STANDBY/ON on the front panel or AUDIO on the remote control
•Activating/deactivating Tray Lock.
You can cancel Resume play (see “Other setting menu— OTHERS” on page 56).
About Tray Lock
You can prevent the disc tray from opening unintentionally by using Tray Lock.
On the front panel ONLY
To lock the disc tray, press 0 while pressing SETTING when the unit is in standby mode.
The unit is turned on and “LOCKED” appears on the display for a little while.
•If you try to open the disc tray, “LOCKED” appears to let you know that the Tray Lock is in use.
To unlock the disc tray, repeat the above procedure.
The unit is turned on and “UNLOCKED” appears briefly on the display.
The disc tray is unlocked.
English
18