Connecting Audio/Video Components

English

7About connecting cords

For video connections

The S-video cords and the component video cord are not supplied with this unit.

Use the cords supplied with the other components or purchase them at your dealer.

AComposite video cord (supplied)

BS-video cord (not supplied)

CComponent video cord (not supplied)

Green

Blue

Notes for video connection

•You can use composite video cord or S-video cord for connecting the DBS tuner and VCR to this unit.

•You can use component video cord in addition to composite video cord and S-video cord for connecting your TV to this unit.

•By using S-video cord or component video, you can get a better picture quality—in the order: composite < S-video < component.

•To view the picture from DBS tuner or VCR on your TV, connect your TV to this unit using the same type of cord for connecting the DBS tuner or VCR to this unit.

•To view the picture from the built-in DVD player, connect the TV to this unit using composite video cord, S-video cord, or component video cord, then register the video output mode correctly (see “Video output mode” on page 25).

•To enjoy the progressive video picture, connect the TV compatible with the progressive video input using component video cord, then change the scanning mode correctly (see “Changing the Scanning Mode” on page 16).

Red

For audio connections

Connect the external components to this unit with the audio cords.

Use the cord supplied with the other components or purchase them at your dealer.

ADigital coaxial cord (not supplied)

BOptical digital cord (not supplied)

CAudio cord (not supplied)

White

Red

Notes for digital connection

•When the unit is shipped from the factory, the DIGITAL IN terminals are set for use with the following components:

–DIGITAL 1 (coaxial): For DBS tuner

–DIGITAL 2 (optical): For TV

•If you connect the CD recorder, change the digital input (DIGITAL IN) terminal setting (see “Digital input (DIGITAL IN) terminals” on page 25) and the source name (see “Changing the Source Name” on page 13) correctly.

•Select the digital input mode correctly (see “Selecting the Analog or Digital Input Mode” on page 14).

8