JVC RX-DV31SL Basic Settings, Setting Speakers Quickly, Press CONTROL, 5Press MEMORY, 3Press MEMORY, Press CONTROL, 7Press MEMORY, Press CONTROL, 1Press SETTING

Basic Settings

English

Some of the following settings are required after connecting and positioning your speakers while others will make operations easier.

7Quick speaker setup (see below)

7Basic item setup (see pages 22 to 25)

•Speaker settings

–Speaker information for subwoofer, front, center, and surround speakers*

–Speaker distance for front, center, and surround speakers*

–Crossover frequency*

–Low frequency effect attenuator*

–Dynamic range compression*

•Digital input (DIGITAL IN) terminals

•Auto surround

•Video output mode

*You can also set these items using the Choice menu (see pages 51 to 56).

Setting Speakers Quickly

You can register the speaker size and distance easily for the connected speakers (Quick Setup).

•To set the speaker size and distance manually, see “Speaker information” and “Speaker distance” on page 23.

4Press CONTROL 3 (or 2) to select an appropriate number of the connected speakers.

•Each time you press the button, the indication changes as follows:

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2AAC LS S RS	MHz
MPEG-2AAC LS S RS	VOL

5 SPEAKERS 3 SPEAKERS

4 SPEAKERS

5 SPEAKERS Select when the front, center, and surround speakers are connected (initial setting).

4 SPEAKERS Select when the front and surround speakers are connected.

3 SPEAKERS Select when the front and center speakers are connected.

5Press MEMORY.

“ENTER USE OF SUBWOOFER” scrolls on the display, then “SUBWFR USE” appears.

On the front panel ONLY

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step 1 again.

1Press SETTING.

The CONTROL buttons now work for basic settings. The setting item selected previously appears on the display. For the configuration of the basic setting items, see “Configuration of the items on the display” on page 22.

2Press CONTROL ∞ (or 5) repeatedly until “QUICK SETUP” appears on the display.

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2 AAC LS S RS	MHz
MPEG-2 AAC LS S RS	VOL

3Press MEMORY.

“ENTER THE NUMBER OF SPEAKERS” scrolls on the display, then “5 SPEAKERS” appears.

6Press CONTROL 3 (or 2) to select whether you have connected a subwoofer or not.

•Each time you press the button, the indication changes as follows:

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2 AAC LS S RS	MHz
MPEG-2 AAC LS S RS	VOL

USE NO

USE Select when a subwoofer is connected (initial setting).

NO Select when no subwoofer is used.

7Press MEMORY.

“ENTER ROOM SIZE” scrolls on the display, then “SMALL ROOM” appears.

8Press CONTROL 3 (or 2) to select an appropriate room size to match your listening room.

•Each time you press the button, the indication changes as follows:

ANALOG DIGITAL AUTO		PL DSP SLEEP PROGRAM REPEAT 1A-B RANDOM PROGRESSIVE RDS	TA NEWS INFO	INPUT ATT
PPCM AUTO SURROUND				SPK 1	2 RE	C
DIGITAL L C	R	GROUP TITLE TRACK CHAP. RESUME B.S.P BONUS TUNED STEREO	AUTO MUTING	AUTO	MODE
				A.POSITION

LPCM SUBWFR LFE	kHz
MPEG-2AAC LS S RS	MHz
MPEG-2AAC LS S RS	VOL

SMALL MEDIUM

LARGE

Select an appropriate room size according to the distance from your listening point to the speakers. See “Speaker distance for each room size” on page 22.