JPEG Disc Playback

English

This unit can play back JPEG files on a CD-R or CD-RW. We call such a disc “JPEG disc” in this instruction.

•Before using the remote control, press DVD to change the remote control operation mode for the JPEG disc operations.

•Turn on your TV and select the correct input mode on the TV.

If “” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do.

7Notes for JPEG

•JPEG discs (either CD-R or CD-RW) require a longer readout time than normal discs. (It depends on the complexity of the folder/file configuration.)

•When making a JPEG disc, select ISO 9660 Level 1 or Level 2 as the disc format.

•This unit supports “multi-session” discs (up to 5 sessions).

•This unit cannot play “packet write” discs.

•The unit can play JPEG files only with the following file extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any uppercase and lowercase combinations (such as “.Jpg”).

•It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a longer time to be shown.)

•If both JPEG files and MP3 files are recorded on a disc, set the MP3/JPEG setting in the PICTURE menu to “JPEG.” (See page 54.)

•This system can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.

*– Baseline JPEG format: Used for digital cameras, web, etc.

–Progressive JPEG format: Used for web.

–Lossless JPEG format: An old type and rarely used now.

•Some JPEG discs may not be played back because of their disc characteristics or recording conditions.

Before using the remote control, press DVD to change the remote control operation mode.

Slide-show Playback

You can play back the still pictures one after another automatically—slide-show playback.

You can also use the buttons on the front panel if they have names similar to those on the remote control.

Starting slide-show playback

Load a JPEG disc, then press 3.

•Slide-show playback starts. Each file (still picture) is shown on the TV for about 3 seconds, then changed to the next file, one after another.

•When all files in a group have been played back, the unit plays back files in the next group.

Stopping slide-show playback temporarily

Press 8.

• You can zoom in on the still picture (see page 50).

To start slide-show playback again

Press 3.

Starting the slide-show playback by specifying a group number

1Press TITLE/GROUP.

The number buttons now work for group selection for about 5 seconds.

The current group number on the display changes to “_ _.”

2Press the number buttons (1 – 10, +10) to enter the group number.

Ex.:

•To select 8 for group number, press 8.

•To select 11 for group number, press +10, then 1.

•To select 27 for group number, press +10, +10, then 7.

The selected group number appears in the group number indication, then slide-show playback starts from the first file in the specified group.

Starting the slide-show playback by specifying a file number

Press the number buttons (1 – 10, +10) to enter the file number.

Ex.: To select the file number 3, press 3.

To select the file number 14, press +10 then 4.

To select the file number 24, press +10, +10, then 4. To select the file number 110, press +10 ten times, then 10.

The selected file number appears in the file number indication, then the slide-show playback starts from the file you have specified.

Selecting files or groups

To skip groups forward

Press TITLE/GROUP, then press ¢ as many times as required.

To skip groups backward

Press TITLE/GROUP, then press 4 as many times as required.

To skip pictures (files) forward

Press ¢ as many times as required.

To skip pictures (files) backward

Press 4 as many times as required.

49