English
Operating JVC’s Audio/Video Components
You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the remote control.
Operating Audio Components
To operate JVC’s audio components using this remote control:
• Aim the remote control directly at the remote sensor on the unit.
• To operate a source with the remote control, the source must be selected using the source selecting buttons on the remote control.
• Refer also to the manuals supplied with your components.
7 Sound control section (Amplifier)
You can perform the following operations:
BASS + or – | Adjusts the bass sound. |
TREBLE + or – | Adjusts the treble sound. |
|
|
AUDIO POSITION | Adjusts the subwoofer audio |
| position. |
|
|
SURROUND ON/OFF | Turns on or off the Surround |
| |
| Surround, and Dolby Pro Logic II. |
|
|
SURROUND MODE | Selects the Surround modes. |
|
|
TEST | Turns on or off the test tone output. |
|
|
CENTER + or – | Adjusts the center speaker channel |
| output level. |
|
|
SURR L + or – | Adjusts the left surround speaker |
| channel output level. |
|
|
SURR R + or – | Adjusts the right surround speaker |
| channel output level. |
|
|
SUBWFR + or – | Adjusts the subwoofer channel |
| output level. |
|
|
EFFECT | Selects the effect level. |
|
|
63