Kathrein UFS 822sw, UFS 822si manual Tuner 1 Setup, Antenna Number, Satellite Name, LNB Frequency

INSTALLATION MENU

TUNER 1 SETUP

Antenna Number:

Each tuner can receive from up to four satellites. Use the  buttons to select the position to which you want to assign a new or different satellite.

Satellite Name:

Press the  button to access the list of available satellites. Select the satellite you want using the

 buttons and confirm your selection with the  button. Make sure your reception system is aligned to the selected satellite.

LNB Frequency:

Use the  buttons to select the LNB frequency applicable to your reception system or press

the  button to view the same listing as on First installation, containing the most common variants as follows:

-Single (LNB Low frequency 9750 MHz)

-Dual (LNB Low frequency 9750 MHz and LNB High frequency 10,600 MHz)

-Universal (LNB Low frequency 9750 MHz and LNB High frequency 10,600 MHz and Limit frequency 11,700 MHz)

Press the  buttons to make your selection. To confirm your selection press the  buttons to select “OK” and press the  button.

22kHz Control:

Press the  buttons to make your selection (On/Off). The 22kHz Control is needed to switch LNBs in multi-feed reception and to switch between Low and High band.

116