Kathrein UFS 822si, UFS 822sw manual Channel Search, FTA CA Select

FIRST INSTALLATION

The notes on First installation are unified once again from this point!

Perform the settings by pressing the  buttons.

Channel Search

Press the  buttons to select whether you want to use the factory default channel list or whether you want to search for more/new channels.

FTA CA Select:

-All: FTA (free-to-air) and encoded channels are searched for

-Only FTA channels: Only non-encrypted channels, such as ZDF in Germany, are searched for

-Only encrypted channels: Only encrypted channels, such as Austria's ORF, are searched for

Encrypted channels can be decoded only by using a CA module and corresponding smart card. CA modules and smart cards are not supplied with this product. Please contact your respective Pay-TV supplier.

Network scan

If you set the network search to “Off”, only the factory stored transponders of the satellites you previously selected will be scanned for new as yet unlisted channels.

If you set the network scan to “On”, the transponder network enables additional transponders that have not yet been stored to be located. They are then stored and searched for new channels in the same way as the existing transponders.

Press the ! (green) button to start the channel search, or if you set the channel search to “Off” you are guided straight to the next item in the First installation process.

25