Kathrein UFS 822sw, UFS 822si manual 22kHz Control, DiSEqC input

FIRST INSTALLATION

22kHz Control:

Press the  buttons to make your selection (On/Off). The 22kHz Control is needed to switch LNBs in multi-feed reception and to switch between Low and High band.

DiSEqC™ input:

Press the  buttons to make your selection. - 1 of 4: for the first satellite of the tuner

- 2 of 4: for the second satellite of the tuner - 3 of 4: for the third satellite of the tuner

- 4 of 4: for the fourth satellite of the tuner

- Mini A: Tone-burst control signal 1 for the first satellite of the tuner (if reception system not DiSEqC™-compatible)

- Mini B: Tone-burst control signal 2 for the second satellite of the tuner (if reception system not DiSEqC™-compatible)

- Disable: If your reception system is not DiSEqC™-compatible and only one satellite per tuner is selected.

22kHz Control:

Press the  buttons to make your selection (On/Off). The 22kHz Control is needed to switch LNBs in multi-feed reception and to switch between Low and High band.

DiSEqC™ input:

Press the  buttons to make your selection. - 1 of 4: for the first satellite of the tuner

- 2 of 4: for the second satellite of the tuner

- 3 of 4: for the third satellite of the tuner

- 4 of 4: for the fourth satellite of the tuner

- Mini A: Tone-burst control signal 1 for the first satellite of the tuner (if reception system not DiSEqC™-compatible)

- Mini B: Tone-burst control signal 2 for the second satellite of the tuner (if reception system not DiSEqC™-compatible)

- Disable: If your reception system is not DiSEqC™-compatible and only one satellite per tuner is selected.

20