USER PREFERENCES
ONE-TOUCH RECORDING INFO WINDOW
Use the buttons here to select whether to enable
advanced recording settings on starting (press the (red) button) or not. If you select “Disable”, in manual recording mode, timeshift recording is automatically started (see “Recording” section). Other recording modes are then excluded.
DEFAULT RECORD DURATION
Use the buttons here to select the default recording time. If you forget to stop a recording you started manually, it is automatically stopped by the receiver when the default recording time elapses. You can choose a value between 30 minutes and 4 hours, in 30 minute increments.
SAVE
When you have made all the settings, press the button to save them.
EPG GRABBING SETUP
On this menu use the buttons to set the time at which you want the UFS 822 to update the EPG data. The receiver (which must be in Standby mode) switches on from Standby, updates the data and then returns to standby. Scheduled recordings do not affect this; the receiver then carries out the update automatically later when recording is finished.
If you set the “EPG Grabbing” to “Off”, the tvtv EPG will not be updated at any time, and the existing tvtv file will be deleted. The EPG then refers back to the SI data (EPG data) sent out by the channel providers. If you set the “EPG Grabbing” back to “On”, you must first update the tvtv data before you can use the
tvtv EPG again. To do this, press the button to switch the receiver into standby mode and wait whilst the update starts up and completes the process.
56
