Kathrein UFS 822si, UFS 822sw manual Connecting UP the VIDEO/PVR, VIDEO/PVR Recorder Recording

CONNECTING UP THE VIDEO/PVR

For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder.

VIDEO/PVR RECORDER RECORDING

For VCR recording, the satellite receiver must be switched on or the timers must be pre-programmed and the receiver be on the channel to be recorded. During the recording the remote control must not be operated, since all displays would be included on the recording.

VIDEO/PVR RECORDER PLAYBACK

You must first set the Scart socket of the UFS 822 to “VCR mode” by pressing the button while the receiver is in operation in order for your TV set to automatically play back the picture from the external recorder.

In this setting, the picture from the external recorder is switched through to the TV set during playback. Pressing the  button again restores priority to the signal from the UFS 822.

Note: The system ensures that the same video and audio signal is present at the TV and VCR Scart sockets. The signal output format ah the TV Scart socket may however differ from that at the VCR Scart socket. The setting of the format output from the TV Scart socket can be set in the menu (“System Setup”, “TV Settings”, “AV Settings” “Video output” or in the First Installation). The format “FBAS” is output as standard at the VCR Scart socket.

127