SYSTEM SETUP
Note: Refer to our network function connection examples at the end of this manual and the instruc- tions on this subject available on the Internet under “www.kathrein.de” “Service” → “Software and Downloading” → “Receiver” → “UFS 822”.
DHCP “On” | DHCP “Off” |
Use the buttons to select the “Get IP Address” field and confirm by pressing the
button. Your DHCP server now indicates the IP address to the receiver. As soon as the receiver has been assigned its IP address by the DHCP server (IP address is displayed),
press the buttons to switch to the “Save” field and press the button to confirm.
If with the “DHCP On” setting no connection can be establis- hed between the receiver and DHCP server/router, switch the setting to “DHCP Off” and per- form the setting as described for (DHCP “Off”).
Perform the settings for your network as
required. Use the buttons to select the lines to be changed; make the changes using the numeric keypad. When you have completed
all the settings, press the buttons to switch back to the “Save” field and press
the button to confirm.
Configuration example:
Receiver: |
|
IP Address: | 192.168.0.11 |
Subnet Mask: | 255.255.255.0 |
PC/Laptop: |
|
IP Address: | 192.168.0.10 |
Subnet Mask: | 255.255.255.0 |
49
