TVTV EPG AND TIMER
DETAILED INFORMATION
Press the button in the EPG to call up details on the selected programme. The information
is only available if the symbol is displayed next to the programme title. The symbol only appears once you have selected the channel and programme by highlighting it with the yellow cursor bar in the
various views of the EPG however.
When you press the button the following display appears (example):
When you call up additional information in
the EPG using the button, you will be shown only the first page of description of the programme.
To obtain the full information on the programme, set the item “EPG Grabbing” in the “User Preference”/”EPG Setup” menu to “Off”. The tvtv data will be deleted and not collected again.
You now can use the full extent of the SI data sent by the programme provider in the EPG.
In order to use the tvtv EPG again, you must restore the item “EPG Grabbing” in the “User Preference”/”EPG Setup” menu
to “On”. In the selection field “EPG Grabbing Time” you can set a specific time of day for updating the tvtv
data. To update the tvtv EPG data immediately, press the button to switch the receiver to standby mode.
Use the buttons to scroll up and down the various pages of detailed information. The third page displays the upcoming episodes (such as of a series; see example):
If further episodes are available (see example), you can display them by pressing the “More Episodes” button. To record a following episode see “Programming a Recording”.
74