RECORDING LIST
The receiver automatically starts playing back the recording. You now have several options for specifying the range to be cut (see example bar):
Start
Middle
End
To set the exact times for the start and end markers as quickly as possible you can use various buttons as aids:
-Use the buttons to rewind or fast forward at up to 24 times playback speed (you can only fast forward recordings which have not yet decoded at 4 times playback speed and rewind them at 2 times playback speed)
-You can use the button to pause the playback and view a
-Use the buttons to jump forward or backwards in
Cut the range marked “Start” as follows:
-Move to the end of the range you want to cut and press the button. Then press the ! (green) button to set the start point marker of the range to be cut. The receiver automatically marks the full range
back to the start of recording. Then press the (red) button to set the end marker at the end of the recording range you want to cut.
Cut the range marked “Middle” as follows:
- Move to the start of the range you want to cut and press the button. Then press the (red) button to set the start marker and move forward to the end of the cut range. Press the button again and the (red) button to set the end marker.
Cut the range marked “End” as follows:
- Move to the start of the range you want to cut and press the button. Then press the (red) button
to set the start marker and press the ! (green) button to automatically select the full range to the end of the recording.
Press the (red) button to cut the marked range from the recording, or press the ! (green) button to reset the markers.
You can only remove one block from the recording in each cut operation. To remove multiple blocks you have to repeat the process.
98
