SYSTEM SETUP
RADIO TEXT
Press the buttons to select whether or not the receiver should display the radio text when in radio mode (this option is available only from software version 1.2).
ETHERNET SETUP
These settings should not be made unless the receiver is linked into a network or is linked to a PC/laptop using a crossed over network cable.
The Ethernet interface used in the receiver is a 10/100 base T Ethernet interface.
Press the button to access the “Ethernet Setup” menu. The following display appears (example):
If you wish to connect your receiver to a DHCP server, use the buttons to select the “On” setting. If you wish to connect your receiver to a PC or laptop, the DHCP setting must be “Off”.
48
