Kathrein UFS 822sw Edit Transponders, Edit Satellite Longitude, New Satellite, Delete Satellite

INSTALLATION MENU

Satellite Name:

Press the  button to access a list of all stored satellites. Use the  buttons to select the satellite you want.

Transponder Frequency:

Use the  buttons to select the transponder frequency.

Edit Satellite Longitude:

Use the numeric pad to key in the new longitude. Use the  buttons to choose between E (East) and W (West).

New Satellite:

Press the  button to enter the name of a new satellite using the alphanumeric keypad (see “Alphanumeric Inputs”).

You can now edit the “Satellite Longitude” setting for this satellite.

Delete Satellite:

Press the  button to delete the currently selected satellite. Use the  buttons to select “OK” on

the on-screen prompt and press the  button to confirm deletion of the satellite with all its transponders and channels.

Deleted satellites must be re-entered manually. If the satellite was factory pre- programmed, it can also be restored by a factory reset. In the process however all your personalised settings (such as Favorites lists) will be lost.

EDIT TRANSPONDERS

Only make changes to this menu when settings or circumstances relating to the transponders have changed. The settings should be made by a specialist engineer.

124