Kathrein UFS 822si, UFS 822sw manual Using the Front Panel, Backup Operation

USING THE FRONT PANEL

BACKUP OPERATION

If you have misplaced your remote control, or if the batteries are flat, you can still operate your receiver from the front panel.

Because there are no number buttons, no password/PIN-protected functions can be displayed.

The front panel houses four buttons and the multifunction control (from now on referred to as “the control”).

Menu button:

Press the Menu button to access the main menu. Move to the various sub-menu items by rotating the control. Select the sub-menus by pressing the middle of the control. Press the Menu button to exit the selected menu and save your changes. Press the Stop/Exit button to exit the menu.

Record button:

Press the Record button to start a manual recording. Select the setting by rotating the control. Press the middle of the control to make your settings. Press the Stop/Exit button to exit the menu without recording the current programme.

Play button:

Press the Play button to access the recording list. Select the programme you want to view by rotating the control and start playback by pressing the middle of the control. Press the Stop/Exit button to exit the menu without starting playback.

Stop/Exit button:

Used to cancel all ongoing actions, such as “Record” and “Play”.

Multifunction control:

-Rotate the control to switch channels.

-Tap the middle of the control to call up the volume bar, then rotate the control to adjust the volume.

-Press the control button twice to switch between TV and radio reception.

-Press and hold down the control button to switch the receiver to Standby mode. Tap the control button to restart the receiver.

133