RECEIVER TO RECEIVER DATA TRANSFER
Your receiver is able to receive data from another receiver via its RS232 port. For this, the two receivers are connected with a null modem cable. The transmitting receiver is the “master”, and the receiving receiver is the “slave”.
Only possible between two UFS 822 receivers!
PREPARATION
The master and slave are both switched on. Then the RS 232 ports of the two receivers are interconnected by a null modem cable.
CHANNEL LIST DOWNLOAD
Master:
Select “System Setup”, “STB Management”, “Transfer Channel Data”. Press the button. Use
the buttons to select “OK” and start the download by pressing the button. The master searches for the slave and, once it has found it, automatically begins downloading the channel list. The following display appears: “Channel data being transmitted”.
Slave:
The following display appears: “Receiving data”. Once all the data has been received, first remove the
DOWNLOAD OPERATING SYSTEM
Not yet available in the current software version.
134
