Kathrein UFS 822sw, UFS 822si manual Signal configuration

FIRST INSTALLATION

Signal configuration	Signal configuration
“As for tuner 1”	“Different from tuner 1”

Press the #(blue) button to view the satellites by continent; that is, which satellites are accessible on which continent. The continents are displayed above the list of satellite names. The selected continent is shown in yellow.

The satellites from the pre-programmed channel list are automatically pre-entered in the right-hand column, and can be changed/deleted according to your reception system.

Press the  buttons and the  button to select the satellites from which you want tuners 1

and 2 to receive signals. Press the  button to confirm your selection; the chosen satellite is then moved into the tuner satellite list on the right.

If you have unintentionally transferred a satellite into the list on the right, you can press the

"(yellow) button to switch between the lists, and

then press the  button to remove the satellite concerned.

When you have selected all the satellites you want, press the ! (green) button.

Press the  buttons and the  to select the satellites you want tuner 1 to receive signals from.

Press the  button to confirm your selection; the chosen satellite is then moved into the tuner satellite list on the right.

If you have unintentionally transferred a satellite into the list on the right, you can press the

"(yellow) button to switch between the lists, and

then press the  button to remove the satellite concerned.

When you have selected all the satellites you want, press the ! (green) button.

18