Kathrein UFS 822si, UFS 822sw manual Channel Search, DiSEqC1.0, Single-cable frequency, Save

INSTALLATION MENU

DiSEqC™1.0:

Press the  buttons to make your selection. - 1 of 4: for the first satellite of the tuner

- 2 of 4: for the second satellite of the tuner

- 3 of 4: for the third satellite of the tuner

- 4 of 4: for the fourth satellite of the tuner

- Mini A: Tone-burst control signal 1 for the first satellite of the tuner (if reception system not DiSEqC™ compatible)

- Mini B: Tone-burst control signal 2 for the second satellite of the tuner (if reception system not DiSEqC™ compatible)

- Disable: If your reception system is not DiSEqC™ compatible and only one satellite per tuner is selected

Single-cable frequency:

If you have selected “Single-cable system”, you can here manually select the single-cable frequency for tuner 1 and tuner 2 (see “First installation”).

Save:

Once you have made all the settings, use the  buttons to select “Save” and press the  button to save the data.

CHANNEL SEARCH

Use the  buttons to select whether you want the search to cover all satellites or only one specific one. If you select “All Satellites” only “Automatic Search” mode is possible. If you choose one specific satellite, your options are:

-Automatic Search: Unrestricted search across all transponders on all satellites (network search possible, selection of FTA and encoded channels possible)

-Manual Search (transponder selection possible, FTA and encoded channels possible, network search possible)

-Advanced Search: Search for a specific channel possible, based on transponder data and PIDs

117