INSTALLATION MENU
AUTOMATIC SEARCH
Network Search:
Use the buttons to select the setting for the network search.
If you set the network scan to “On”, the transponder network enables additional transponders that have not yet been stored to be located. They are then stored and searched for new channels in the same way as the existing transponders.
If you set the network search to “Off”, only the current stored transponders of the satellites you previously selected will be scanned for new as yet unlisted channels.
FTA CA Select: |
|
|
|
Use the buttons to | select whether you want to search through all | channels or | only |
FTA (Free to Air) or CA (Conditional Access) channels (Common Interface “encrypted channels”). |
| ||
Start Search: |
|
|
|
When you have made your | selection, use the buttons to select “Start | Search” and | press |
the button to start the search.
118
