| CONNECTING THE TRANSPORTER WITH THE HF | |
1 | TRANSCEIVER | |
You can use the optional cables | ||
2 | ||
Transporter with the HF transceiver. For these cables, | ||
3 | ||
contact your authorized KENWOOD dealer. | ||
4 | Note: | |
5 | ◆ Switch OFF both the Transporter and HF transceiver before making | |
| the connection. |
6◆ The Transporter automatically transmits its call sign in Morse at
7regular intervals because of the legal requirement; therefore, transmit sidetone must be output from the HF transceiver. On
8
9◆ When the Transporter is too close to the HF transceiver, unwanted
10feedback may cause malfunction.
◆Do not share a regulated power supply between the Transporter and
11the HF transceiver. Unwanted feedback may cause malfunction.
12
13
14
15
16
17
18
19
20
21
22
23
I/O unit
2.5 mm (1/10")
3.5 mm (1/8")
I/O unit
You need not worry about which end goes to which side
HF transceiver
COM connector
EXT SP jack
MIC connector
3.5 mm (1/8")
You may install appropriate noise filters at the shown positions to prevent unwanted feedback from causing malfunction.