Select an interval for automatically transmitting APRS data. The default is 5 minutes.
1Press [MENU] to enter Menu mode.
2Press [2], [7] to select
STA CON | 96 BCONDUP |
5 7 9
3Press [UP]/ [DWN] to select the desired interval.
•The selectable intervals are .5, 1, 2, 3, 5, 10, 20, and 30 minutes.
STA CON | 96 BCONDUP |
5 7 9
4Press [OK] to complete the setting.
5Press [MENU] to exit Menu mode.
Note:
◆With “AUTO” in Menu
◆While signals are present, APRS data is not transmitted after the interval. Approximately 2 seconds after signals drop, transmitting is executed.
If APRS is popular in your country, you may receive too many APRS packets for a short period. If this disturbs your APRS activities, specify a distance from your location. You will not receive APRS data from stations beyond this distance.
1Press [MENU] to enter Menu mode.
2Press [2], [B] to select
STA CON | 96 BCONDUP |
5 7 9
3Press [UP]/ [DWN] to select the desired distance.
•The selectable range is from 10 to 2500 in steps of 10, plus OFF. The unit is mile or kilometer depending on the selection in Menu
STA CON | 96 BCONDUP |
5 7 9
4Press [OK] to complete the setting.
5Press [MENU] to exit Menu mode.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
75