Kodak A-61097 manual The following section contains an explanation of each field

Custom Check Digit Definition

Custom Check Digit Formula

Check Digit = Constant 2 - [Sum of IA Digits * Attributes] + Constant 1

	Divisor
Parameter	Current Value
Attributes	46231546231
Constant 1	00
Constant 2	00
Divisor	07
Left/Right	Right
LUT Status	No
Lookup Table	abcdefghijk
Help
Previous Menu

The parameters displayed in the Custom Check Digit Definition window must be defined.

The following section contains an explanation of each field:

∙Constant 2—A constant value in the range 0 through 99.

∙IA Digits—The digits comprising the Image Address. The Image Address may contain a fixed field as many as three level fields. The Image Address cannot exceed 11 data characters when accompanied by a check digit; the check digit occupies one character position.

∙Attributes—These are position weights for digits in the Image Address. A zero-value attribute causes the associated Image Address digit to be excluded from the check digit calculation. Each digit in the Image Address is multiplied by its attribute and summed. For example, if the Image Address is 1202.14.342.12 and you wish to calculate a check digit that excludes the fixed field (1202), the attributes (using Table 1) would be 00001546231.

Table 1: Default Image Address Attributes

C10	c9	c8	c7	c6	c5	c4	c3	c2	c1	c0
4	6	2	3	1	5	4	6	2	3	1

NOTE: The “c” in Table 1 refers to the character position.

2-30 A-61097 May 1997