Kodak A-61097 manual Select Batch Value

Batch Value

Defines the number of documents to be counted prior to performing a predefined action. The default value is 99.

■ Microimager 70	■	Microimager 70/AFM	■	Scanner 900
■ Scanner 923	■	Scanner/Microimager 990	■	Scanner 9500

1.Select Batch Value.

Mode Number: 10			Mode Name: MODE10
		Mode Configuration			Batching
MODE 10	Mode Name		Ftswitch Pressed	Undef	Batch Level
					Batch Value
3 Lvl	Index Format		Ftswitch Released	Undef
					Start of Batch Function
Supprs	IA Display Format		Ftswitch Cnf Tone	Off
					End of Batch Function
4233	IA Field Widths		Patch Reader 1	Off
2112	Level Rules		Patch Reader 2	Off	Previous Menu
None	Batching		Patch Definition	Lvl 2
Auto	AEC Mode		Bar Code	Off
Duplex	Film Mode		Confirmation Tone	N N N
?????	Reduction Ratio		OCR Status	Off
1 Roll	# of Cassettes		COIN User Channel	On
Comic	Film Writer		Printer Control	Disply
Off	Image Mgmt Code		Primary DP-1	Off
Off	Length Monitor		Secondary DP-1	Off
Off	Skew Monitor		Doc. Printer 12	Off
Xport	Check Stacker		Document Sorter	Off
Off	Endorser		Mode Overrides	No Sav
	Not Used		Film Definition	F	Enter Batch Value
					99
Save & End Session			Don't Save & End Session
	Previous Menu		End Configuration
					Range: 1-99

2.Enter the number of documents to be counted as a batch.

The value entered should be between 1 and the maximum image address size for the field (or 9999, whichever is less).

Use the following information to determine the maximum number allowed:

—If the length of the level field is 1, the maximum batching value is 9.

—If the length of the level field is 2, the maximum batching value is 99.

—If the length of the level field is 3, the maximum batching value is 999.

—If the length of the level field is 4, the maximum batching value is 9999.

—If the length of the level field is 5 – 9, the maximum batching value is 99999.

A-61097 May 1997 3-15